Blog
Interviews
Whitepapers

Blog

A man in a control room, looking a computer that shows AMFG and Photocentric's technology
August 3, 2026
Eliminating Silent Downtime with Software
Is your shop floor running below capacity without you realizing it? Uncover the hidden operational bottlenecks quietly dragging down your throughput and see how modern software solutions can eliminate them to unlock hidden capacity.
Featured Posts
Eliminating Silent Downtime with Software
August 3, 2026
Thinking to Start a Machine Shop? Here’s What You Need to Know.
July 16, 2026
Machine Shop Estimating and Quoting Software Explained
July 7, 2026
Why Are There So Few Women in Manufacturing?
February 18, 2026
News & Trends
See All
Creating a Resilient Supply Chain in 2026
Currently the last line of article posts fades into whiteness at the bottom, please do not copy this design.
January 19, 2026
AMFG & Adaero collaborate to lower the estimating skills barrier
Currently the last line of article posts fades into whiteness at the bottom, please do not copy this design.
December 10, 2025
AMFG, Photocentric, and APWorks unite to develop Intelligent Orbital Manufacturing capabilities.
Currently the last line of article posts fades into whiteness at the bottom, please do not copy this design.
November 17, 2025
Is Manufacturing Dirty, Dangerous, and Dull?
Currently the last line of article posts fades into whiteness at the bottom, please do not copy this design.
October 3, 2025
A man in a control room, looking a computer that shows AMFG and Photocentric's technology
January 19, 2026
Creating a Resilient Supply Chain in 2026
Videos
Watch us on YouTube
Editor's Picks
Tony Gunn, smiling at the camera. Behind him is a shelf full of books, awards, and photos.
18 February 2026
Why Are There So Few Women in Manufacturing?
Meghan Ziemba looking at the camera and smiling.
4 August 2025
Loss, Opportunity, and AI: an interview with The WorldWide Machinist, Tony Gunn
12 September 2025
Interviewing a Maven of Manufacturing: with Meaghan Ziemba
A picture of Meghan Ziemba. She is smiling.
A black and white photo of Keyvan Karimi in a white shirt, smiling into the camera.
18 September 2025
AI's impact on manufacturing: an interview with Keyvan Karimi, CEO of AMFG

Most Popular

A picture of Tony Gunn, in a black t-shirt and wearing white corded earphones. He is smiling, and sitting in front of shelves which are full of books, pictures, and trophies.
March 11, 2026
Loss, Opportunity, and AI: an interview with The WorldWide Machinist, Tony Gunn
A picture of Meghan Ziemba. She is smiling.
February 26, 2026
Interviewing a Maven of Manufacturing: with Meaghan Ziemba
Two men sitting on a sofa. On the left is Henry Morris, on the right is Johnny Goode. They are smiling, and mid conversation.
February 26, 2026
Lessons from Law Enforcement: an interview with Johnny Goode
A black and white picture of Keyvan Karimi, smiling into the camera.
April 27, 2026
AI's impact on manufacturing: an interview with Keyvan Karimi, CEO of AMFG
February 4, 2026
Expert Interview: Timm Kragl on Why MES Software is Crucial for Successful 3D Printing Operations
A picture of Tony Gunn, in a black t-shirt and wearing white corded earphones. He is smiling, and sitting in front of shelves which are full of books, pictures, and trophies.
August 4, 2025
-
Expert Interviews
Loss, Opportunity, and AI: an interview with The WorldWide Machinist, Tony Gunn
A picture of Meghan Ziemba. She is smiling.
August 5, 2025
-
Expert Interviews
Interviewing a Maven of Manufacturing: with Meaghan Ziemba
Two men sitting on a sofa. On the left is Henry Morris, on the right is Johnny Goode. They are smiling, and mid conversation.
September 11, 2025
-
Expert Interviews
Lessons from Law Enforcement: an interview with Johnny Goode
October 17, 2019
-
Expert Interviews
Experteninterview: Guillaume de Calan, CEO von Nanoe, über die Zukunft des keramischen 3D-Drucks
October 17, 2019
-
Expert Interviews
Experteninterview: Neil van Es, Gründer von Parts on Demand, über die Einführung des 3D-Drucks in die Produktion
October 17, 2019
-
Expert Interviews
Experteninterview: CEO von PostProcess Technologies zur Lösung des Nachbearbeitungs-engpasses für die additive
October 17, 2019
-
Expert Interviews
Experteninterview: Eckharts Additive Manufacturing Applikation, Ingenieur Robert Heath, über 3D-Druck, Automatisierung und Industrie 4.0
September 13, 2019
-
Expert Interviews
10 Vorhersagen über die Zukunft des 3D Drucks [Sachverständigen Roundup]
August 15, 2019
-
Expert Interviews
Experteninterview: Scott Dunham, Vize Präsident Research bei SmarTech Analysis, über die wichtigsten Trends in der Branche der additiven Fertigung [Zweiter Teil]

Expert Interviews

A picture of Tony Gunn, in a black t-shirt and wearing white corded earphones. He is smiling, and sitting in front of shelves which are full of books, pictures, and trophies.
August 4, 2025
-
Expert Interviews
Loss, Opportunity, and AI: an interview with The WorldWide Machinist, Tony Gunn
A picture of Meghan Ziemba. She is smiling.
August 5, 2025
-
Expert Interviews
Interviewing a Maven of Manufacturing: with Meaghan Ziemba
Two men sitting on a sofa. On the left is Henry Morris, on the right is Johnny Goode. They are smiling, and mid conversation.
September 11, 2025
-
Expert Interviews
Lessons from Law Enforcement: an interview with Johnny Goode
A black and white picture of Keyvan Karimi, smiling into the camera.
September 18, 2025
-
Expert Interviews
AI's impact on manufacturing: an interview with Keyvan Karimi, CEO of AMFG
A picture of Matt Guse. He is looking into the camera and smiling. Behind him is the American flag. He is wearing a black t-shirt with a white collar, and a black baseball hat, both of which have MRS Machining stamped onto them.
January 30, 2026
-
Expert Interviews
Giving Back to Manufacturing – an interview with Matt Guse
October 11, 2024
-
Expert Interviews
Expert Interview: Alex Cairns on Getting Manufacturing Moving
September 12, 2024
-
Expert Interviews
Expert Interview: Howard Sheldon on Championing British Manufacturing
September 6, 2024
-
Expert Interviews
Expert Interview: Yanesh Naidoo on The Legacy of Industry 4.0
August 5, 2024
-
Expert Interviews
Expert Interview: How Thomas Flude Is Disrupting Manufacturing with Engineers Insight
July 25, 2024
-
Expert Interviews
Expert Interview: Jesse Casto's BetterCNC Mission
June 7, 2024
-
Expert Interviews
Expert Interview: Discussing the Landscape of Manufacturing with GTMA CEO Alan Arthur
April 29, 2025
-
Expert Interviews
From Chanel to Alpine: 3D Printing Mass Production with Erpro Group CEO Cyrille Vue
March 1, 2023
-
Expert Interviews
Expert Interview: Novadditive CEO Vincent Poirier Discusses the Transformative Impact of 3D Printing on Ceramics
January 31, 2023
-
Expert Interviews
Expert Interview: The Barnes Global Advisors and Metal Powder Works CEO John Barnes on the Importance of Materials Innovation to AM’s Evolution
October 7, 2020
-
Expert Interviews
Expert Interview: nTopology CEO on Advancing AM Potential with Generative Design Software
July 30, 2020
-
Expert Interviews
Expert Interview: Anisoprint CEO Fedor Antonov on Why Composite 3D Printing Is One of the Biggest Trends in AM
August 13, 2020
-
Expert Interviews
Expert Interview: Origin CEO Chris Prucha on Why The AM Industry Needs An Open Materials Ecosystem
June 15, 2020
-
Expert Interviews
Expert Interview: Timm Kragl on Why MES Software is Crucial for Successful 3D Printing Operations
June 10, 2020
-
Expert Interviews
Expert Interview: Oxford Performance Materials’ Scott DeFelice on the Evolution of High-Performance Polymers for 3D Printing
June 3, 2020
-
Expert Interviews
Expert Interview: Lithoz’s CEO Dr Johannes Homa on the State of Ceramic 3D Printing
April 28, 2020
-
Expert Interviews
Expert Interview: LEO Lane’s VP Business, Lee-Bath Nelson, on the Importance of Digital Supply Chains and Inventory
April 15, 2020
-
Expert Interviews
Expert Interview: NMBU's Kristian Omberg on How it is Manufacturing Medical Supplies Amidst the COVID-19 Pandemic
February 26, 2020
-
Expert Interviews
Expert Interview: BCN3D’s CTO, Eric Pallarés, on the Versatility of its IDEX 3D Printing Technology
February 13, 2020
-
Expert Interviews
Expert Interview: 3D Hubs’ Agata Lovrecich on the Growth of its Online Manufacturing Platform
January 20, 2020
-
Expert Interviews
Expert Interview: Altair's Ravi Kunju On Simulation Software For 3D Printing
December 18, 2019
-
Expert Interviews
Expert Interview: America Makes Executive Director, John Wilczynski, on How it is Driving Advancements in 3D Printing
November 27, 2019
-
Expert Interviews
Expert Interview: Jan Tremel on How Bosch Is Using 3D printing at Its Center of Competence
November 6, 2019
-
Expert Interviews
Expert Interview: Additive Manufacturing Technologies CEO, Joseph Crabtree, on Why Post-Processing is Crucial for 3D Printing
August 14, 2019
-
Expert Interviews
Expert Interview: Aconity3D Managing Director Yves Hagedorn on Helping Companies Innovate with Additive Manufacturing
August 6, 2019
-
Expert Interviews
Expert Interview: Exploring Photocentric’s Daylight Polymer Printing Technology with Managing Director Paul Holt
July 30, 2019
-
Expert Interviews
Expert Interview: Fortify CEO Josh Martin on its Digital Composite Manufacturing Technology
July 2, 2019
-
Expert Interviews
Expert Interview: Arevo Co-Founder Wiener Mondesir On Producing the World’s First 3D-Printed Carbon Fiber Bike Frame
May 15, 2019
-
Expert Interviews
Expert Interview: MELD Manufacturing CEO Nanci Hardwick on Fulfilling the Potential of Metal Additive Manufacturing
May 2, 2019
-
Expert Interviews
Expert Interview: SmarTech Analysis’ Vice President of Research Scott Dunham on the Key Trends Shaping the Additive Manufacturing Industry [Part One]
April 4, 2019
-
Expert Interviews
Expert Interview: Autodesk's Robert Yancey on Additive Manufacturing, Generative Design and Industry 4.0
March 13, 2019
-
Expert Interviews
Expert Interview: Solvay’s Brian Alexander on Developing High-Performance Polymers for 3D Printing
October 16, 2018
-
Expert Interviews
Expert Interview: Ultimaker President John Kawola on the Future of 3D Printing

Whitepapers

The Additive Manufacturing Landscape 2019
An essential guide into the additive manufacturing market today
State of the 3D Printing Industry Survey 2019 ​AM Service Providers
Four key insights into the 3D Printing Industry in 2019
The Digital Marketing Opportunity For 3D Printing Service Providers
Digital marketing techniques and tips to help you grow your business
Additive Manufacturing MES Software: ​The Essential Guide
How You Can Use Additive MES to Scale Your Additive Manufacturing Operations
The Additive Manufacturing Landscape 2020
Key insights into the additive manufacturing industry in 2020
Privacy Policy © AMFG 2026. All rights reserved.
info@amfg.ai+1 949 652 2096
Product
Estimating & Quoting
Auto-QuotingGeometric Estimating EngineWork Plan GenerationAI 2D Drawing Analysis
Production
Planning & SchedulingJob TrackingShop Floor ControlQuality Tracking
Automation
Design CostingMCP ServerAutonomous WorkflowsIntegrations
Security & Compliance
ITAR, CMMCCloud & On-Prem HostingISO/AS9100
Solutions
By Process
CNC MachiningAdditive Manufacturing
For High-Mix Low
Volume
Job ShopContract ManufacturingPrototypingEnterprise OEM
By Industry
Aerospace and DefenceAutomotiveConsumer GoodsIndustrial GoodsOrthotics and Prosthetics
Company
About AMFGReferralsContact Us
Blog ArchiveWhitepapers Archive
Resources
BlogExpert InterviewsPress Releases
Find Us